Now Available
Now available in larger motor sizes — up to 1 hp!
The Aquasweep from Scott Aerator is an industry-leading solution to dock, canal, beach, and shoreline clean-up, improvement, and maintenance. The Dock Mount Aquasweep can keep your waterfront clean from algae, trash, and decaying debris on the surface, or it can be used to blast muck, silt, weeds, and decaying leaves from the bottom. In fact, the Aquasweep has been the top debris and muck mover in the industry since we launched it back in 1994!
The Aquasweep safely mounts to your dock via the included stainless steel mounting plate, or you can add a post-mounting bracket at additional cost. You can also purchase a mounting post to place your Aquasweep anywhere you need its muck-blasting power! Mounting the Aquasweep to your dock or to the add-on post and positioning the Aquasweep 2-4" from the bottom will give you the best muck-blasting results. The stainless steel yoke assembly the unit is attached to reaches a depth of up to 7 feet.
- 5-year, unconditional warranty on motor.
- Our ½-hp motor is rated at 400 gallons-per-minute flow rate, pushes debris a minimum 50 feet.
- Our ¾-hp motor is rated at 450 gallons-per-minute flow rate, pushes debris a minimum 60 feet.
- Our 1-hp motor is rated at 500 gallons-per-minute flow rate, pushes debris a minimum 75 feet.
- Moves muck and bottom debris up to 150 feet in diameter.
- Runs at a constant 3,450 rpms, 48 lbs. of thrust achieved with the ½-hp motor, 58 lbs. with the ¾ hp, 72 lbs with the 1 hp.
- Minimum water depth required is 12".
- Maintenance-free, environmentally-friendly motors.
- ½-hp motor runs at 115 volts 10 amps, 680 watts.
- ¾-hp motor runs at 10.5 amps, 875 watts.
- 1-hp motor runs at 11.5 amps, 1095 watts.
- 50 feet of 12-gauge submersible power cord on the ½ hp unit, 10-gauge on the larger units, longer power cords available.
- Over 7 feet in length, 55 to 68 pounds.
- Rugged, high-density polyurethane-and-stainless steel construction.
- We also have larger 230-volt motors, many variations of 3-phase and 50-Hz models available.
- ARL tested and approved to be in compliance with the applicable requirements of UL and the National Electric Code as complete packages.