Now Available
Creates an impressive cascade of water that sounds as beautiful as it appears. The brass center nozzle sprays at heights of up to 20 on the 1/2-HP model (40 on the 1.5HP model) and its surrounded by separate side nozzles which create a spectacular angled spray pattern, projecting water over 15 at a 45 degree angle.
The Clover not only beautifies your pond, but also provides a healthy aquatic environment through high oxygen transfer rates and a large volume of water circulation. Like all of the products Scott Aerator manufactures, the Clover utilizes a stainless steel, oil-free submersible motor, making it the most environmentally friendly style of fountain on the market.
The Clover is proudly manufactured in the USA and carries an unconditional, 5-year motor warranty
You may upgrade the 1/2 hp /115v model to 230 volts.
If you choose to do this, purchase the 1/2hp model, and purchase the upgrade.
Scc10: Upgrade to 230V
1/2 hp
- 115-volt, ½-hp, oil-free motor. 230-volt motor also available.
- 60 gallons of water per minute.
- Center stream is 20 feet high.
- Side jets' angled spray pattern extends 15 feet.
- Electric cable provided is 70 feet in length, 12-gauge submersible, with plug.
- Electric cable can be ordered in greater lengths, up to 150 feet for 115-volt motor, even longer with 230-volt motor.
- Light kits can be added later.
- Approved for use in salt water.
- Two 20-pound weights or concrete blocks required for anchoring (not included).
- Two nylon ropes required for anchoring (not included).
- Designed for 24-hour-per-day operation.
- No maintenance required.
- 36-inch minimum pond depth required.
- Motor specs: 60 Hz, single phase, 10 amps, 680 watts, 115 volts. 230-volt motor also available.
- 5-year motor warranty.
1-1/2 hp
- 1½-hp, 230-volt, oil-free motor.
- 90 gallons of water per minute.
- Center stream is 40 feet high.
- Side jets' angled spray pattern is 20 feet.
- Electric cable provided is 100 feet long, 12-gauge submersible.
- Electric cable can be ordered in greater lengths.
- Light kits can be added later.
- Approved for use in salt water.
- Two 20-pound weights or concrete blocks required for anchoring (not Included).
- Two nylon ropes required for anchoring (not included).
- Designed for 24-hour-per-day operation.
- No maintenance required.
- 38-inch minimum pond depth required.
- Motor specs: 60 Hz, single phase, 10.6 amps, 1780 watts.
- 5-year motor warranty.
